Gorilla Brakes

How to Easily Replace Disc Brake Pads – Step-by-Step Guide

Fitting bicycle disc brake pads is a crucial part of bicycle maintenance. Not only do disc brakes provide more stopping power than traditional rim brakes, but they also require more maintenance and upkeep. As such, it is important to know how to properly fit and maintain your disc brake pads. In this article, we will discuss the steps involved in fitting bicycle disc brake pads, including how to identify the right brake pads for your bike, how to fit and align them correctly, and how to maintain them.

The first step in fitting bicycle disc brake pads is to identify the correct brake pads for your bike. Disc brakes require specific brake pads depending on the type of disc brakes you have on your bike. For example, Shimano disc brakes require specific Shimano brake pads, while Avid disc brakes require specific Avid brake pads. It is important to check with your bike manufacturer or bike shop to ensure you are purchasing the correct brake pads for your bike.

Once you have identified the correct brake pads for your bike, the next step is to fit and align them properly. Start by cleaning the disc brake rotor and the caliper. Use a clean rag and rubbing alcohol to remove any dirt or grime on the rotor and caliper.

Once the rotor and caliper are clean, it is time to fit the brake pads in the caliper. Make sure the brake pads are properly aligned, with the back of the pad facing the spokes and the front of the pad facing the rotor. Make sure the pad slots in the caliper are lined up with the corresponding slots in the brake pads.

Once the brake pads are fitted in the caliper, it is time to set the correct pad clearance. Set the gap between the rotor and the brake pads to the manufacturer’s recommended clearance. The pad clearance should be between 0.5 and 1.5mm.

Once the pad clearance is set, it is time to align the disc brake rotor. Align the rotor by loosening the mounting bolts and centering the rotor on the hub. Make sure the rotor is aligned straight and that the pads are not rubbing on the rotor.

Once the rotor is aligned and the brake pads are fitted correctly, the last step is to secure the brake pads with the mounting bolts. Tighten the mounting bolts until they are snug. Be careful not to overtighten the bolts, as this can lead to damage to the brakes or the pads.

Now that your disc brake pads are fitted correctly, it is important to maintain them properly. Inspect the pads periodically for signs of wear and tear. Replace the pads when they start to wear down or when they wear unevenly. Make sure to keep the rotor and caliper clean, as dirt and grime can cause the pads to wear more quickly. Additionally, be sure to properly lubricate the moving parts with a bike-specific lubricant.

By following these steps, you can ensure your disc brake pads are fitted and maintained properly. This will help ensure your brakes are working effectively and safely, giving you more control and stopping power when you need it.