Gorilla Brakes

Solving the Noise Problem: Tips for Quieting Noisy Mountain Bike Road Disc Brakes

===INTRO:
Mountain bike road disc brakes are a great way to get that extra stopping power on downhill rides. However, the noise created by the brakes can be a nuisance for both the rider and anyone nearby. Fortunately, there are some tips and tricks that can help quiet down noisy brakes. Read on to learn more.

Identifying the Problem

The primary symptom of a noisy mountain bike road disc brake is a squealing or screeching sound when the brakes are applied. This sound is caused by a high frequency vibration between the disc and the brake pad. If left unchecked, this can cause excessive wear on the brake components and may even lead to complete brake failure.

Diagnosing the Cause

The cause of the noise can usually be traced back to a few common problems. Contamination of the brake surface is the most common culprit. This can be caused by dirt, oil, or other debris that has built up on the brake pad surface. In some cases, the noise may be caused by a warped disc or even a loose brake caliper.

Finding Solutions

The first step to solving a noisy brake problem is to inspect the brake components for any signs of contamination. If any dirt or debris is found, it should be removed before further troubleshooting can be done. Once the surface is clean, the disc should be checked for warping or any other structural damage. Finally, the brake caliper should be tightened if it is found to be loose.

Implementing Tips

Once the cause of the noise has been identified, there are a few tips that can be used to reduce the noise level of the brakes. 

First, the brake pad should be replaced with a softer compound that can absorb the vibrations more effectively. 

Additionally, the brake caliper should be adjusted to ensure that the pad is correctly aligned with the disc.


Noisy mountain bike road disc brakes can be a real nuisance, but with the right tips and tricks, they can be easily silenced. By inspecting the brake components for contamination and making sure the disc and brake pad are properly aligned, the noise levels can be drastically reduced. With these tips in mind, you can enjoy a quieter, more enjoyable ride.


For more help and idea please feel free to contact us on 08007720937 we deal with is on a daily basis and have every known way possible to eliminate noise.

  • "A set of titanium disc brake retaining pins for SRAM LEVEL, RED, FORCE, RIVAL, AXS. Made from aerospace grade titanium, they are non-corrosive and lightweight, with a variety of custom color options and a lifetime warranty on both the titanium and anodizing.
  • SRAM titanium disc brake retaining pins in various colors such as silver, blue, bronze, purple, gold and ice blue
    All Brake pads

    SRAM Titanium Disc Brake Pad Retaining Pins

    Rated 0 out of 5
    £14.99 Select options
  • Sale! A close-up of Hayes Dominion T4 Disc Brake Pads with Enduro Pro Compound.
  • Sale! The Hayes T2 disc brake pads are a set of replacement brake pads made by Hayes Bicycle Group. They are designed to fit Hayes T2 brakes and are made of a high-performance Kevlar compound for maximum durability and stopping power. The pads are easy to install and provide a consistent brake feel. They come in two different sizes, standard and extra-long, to accommodate different wheel sizes. The Hayes T2 disc brake pads are a great choice for riders looking for a dependable, long-lasting brake pad that offers great stopping power.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.