Zu Produktinformationen springen
1 von 1

Shimano MT-Serie (Typ B) – Keramik-Scheibenbremsbeläge | Gorilla Brakes

Shimano MT-Serie (Typ B) – Keramik-Scheibenbremsbeläge | Gorilla Brakes

🔥 150,000+ riders trust Gorilla Brakes worldwide⭐ Rated 4.8/5 from verified customers

Normaler Preis £12.99 GBP
Normaler Preis Verkaufspreis £12.99 GBP
Sale Ausverkauft
Inkl. Steuern. Versand wird beim Checkout berechnet. Für Lieferungen nach Deutschland und Frankreich: Keine zusätzlichen Kosten bei der Lieferung. Alle Steuern, Zölle und Einfuhrgebühren werden von Gorilla Brakes übernommen. Sie zahlen nur den an der Kasse angezeigten Gesamtbetrag.
Anzahl
Kompatibilität prüfen →
Ausgewählte Mischung: CeramicSanftes, progressives Bremsverhalten mit geringer Geräuschentwicklung für alltägliche XC-, Straßen- und Gravel-Fahrten sowie Pendelstrecken. Diese Mischung gehört zur Gorilla Brakes Performance-Reihe für herkömmliche Fahrräder.

🚚 Dir fehlen noch £25.00 bis zur KOSTENLOSEN SCHNELLEN Lieferung innerhalb des Vereinigten Königreichs

Vorne + hinten?Wähle für vorne und hinten 2 Packungen, wenn beide Bremssättel diese Belagform verwenden. Beachte den unten angegebenen Lieferumfang.
£12.99
Vollständige Details anzeigen

Gorilla Brakes Ceramic-Bremsbeläge für die unten aufgeführten kompatiblen Bremssättel.

Gleichen Sie vor der Bestellung die vorhandene Belagform und das genaue Bremssattelmodell ab. Die Leistungsangaben beschreiben die Reibmischung Ceramic.

Auf einen Blick

Technische Daten

Belagmischung
Ceramic
Trägerplatte
Stahl
Belagform
Shimano B-Typ
Einsatzbereich
Alltägliche XC-, Straßen- und Gravel-Fahrten sowie Pendelstrecken
Lieferumfang
2 Bremsbeläge und 1 Belagfeder
Für
1 kompatibler Bremssattel

Jede Packung enthält ein Paar Beläge (2 Beläge) und 1 Feder für einen kompatiblen Bremssattel. Prüfen Sie für einen Austausch vorne und hinten beide Bremssättel und bestellen Sie jeweils die passende Packung.

Vor der Bestellung prüfen

Kompatibilität

Diese Beläge verwenden die Shimano B-Type Form. Gleichen Sie den genauen Bremssattelcode unten ab; Shimano Seriennamen allein bestimmen nicht die passende Belagform.

Kompatible Bremssättel
BremsenserieKompatible Bremssättel
Shimano MTBR-MT500, BR-MT400, BR-MT410, BR-MT200
Shimano M-SerieBR-M3050, BR-M315, BR-M355, BR-M365, BR-M375, BR-M395, BR-M4050, BR-M415, BR-M416, BR-M416A, BR-M445, BR-M446, BR-M447, BR-M465, BR-M475, BR-M485, BR-M486, BR-M495, BR-M505, BR-M506, BR-M515, BR-M515-LA, BR-M525, BR-M575
Shimano Trekking / mechanischBR-T615, BR-T675, BR-TX805, BR-C501, BR-C601
Shimano Flat-Mount / CUESBR-UR300, BR-U6030-F, BR-U6030-R

Empfehlung für E-Bikes

Gorilla Brakes ordnet die Standardmischung Ceramic seiner Performance-Reihe für herkömmliche Fahrräder zu. Für E-Bikes empfiehlt Gorilla Brakes die Bremsbelagreihen Enduro Pro und Factory Racing. Stimmen Sie die Belagform und die gesamte Bremsanlage auf Ihr Fahrrad und sein Gesamtgewicht ab.

Bremsscheibenkompatibilität

Diese Belagmischung ist für alle Arten von Fahrrad-Bremsscheiben geeignet, einschließlich Scheiben mit der Kennzeichnung „resin pads only“ (nur Resinbeläge).

Durchmesser und Dicke der Bremsscheibe müssen den Vorgaben Ihres Bremsenherstellers entsprechen. Prüfen Sie den Zustand und die zulässige Mindestdicke der Bremsscheibe, bevor Sie neue Beläge montieren.

Leistung der Belagmischung

Ceramic

Sanftes, progressives Bremsverhalten mit geringer Geräuschentwicklung für alltägliche XC-, Straßen- und Gravel-Fahrten sowie Pendelstrecken. Diese Mischung gehört zur Gorilla Brakes Performance-Reihe für herkömmliche Fahrräder.

Die tatsächliche Bremsleistung und der Verschleiß hängen von Ihrem Bremssystem, der Bremsscheibe, dem Einbremsen und den Fahrbedingungen ab.

Wärmemanagement

Trägerplatten aus Aluminium oder Stahl?

Diese Beläge haben eine Trägerplatte aus Stahl. Die Hinweise zur Mischung beziehen sich auf das Reibmaterial der Standardmischung Ceramic.

Montage und Einbremsen

Befolgen Sie die Montageanleitung für Ihr Bremssystem und führen Sie anschließend das empfohlene Einbremsverfahren durch, bevor Sie normal fahren.

Google Top Quality Store

Verified by Google

5.0/5.0
Verified Quality Store

Hilfe und Montage

Machen Sie Ihre Bremsen bereit

Prüfen Sie die Passform, bereiten Sie Ihre Bremsen vor und finden Sie Unterstützung.

Ihre Fragen

Über diese Bremsbeläge

Passform, Materialien und Bremsleistung einfach erklärt.

Ist Ceramic dieselbe Mischung wie Enduro Ceramic?

Nein. Dieses Angebot verwendet die Standardmischung Ceramic, eine Alltagsoption aus der Gorilla Brakes Performance-Reihe für XC, Straße, Gravel und Pendelfahrten. Enduro Ceramic ist eine eigenständige Mischung für Fahrten bei wärmeren, trockenen Bedingungen.

Wie prüfe ich, ob diese Beläge zu meinen Bremsen passen?

Gleichen Sie das genaue Bremssattelmodell und die vorhandene Belagform mit der Kompatibilitätstabelle auf dieser Seite ab. Verlassen Sie sich nicht allein auf den Namen des Bremshebels oder der Baureihe. Prüfen Sie Vorder- und Hinterradbremssattel getrennt, da einige Systeme unterschiedliche Belagformen verwenden.

Welche Bremsscheiben kann ich mit dieser Belagmischung verwenden?

Diese Belagmischung ist für alle Arten von Fahrrad-Bremsscheiben geeignet, einschließlich Scheiben mit der Kennzeichnung „resin pads only“ (nur Resinbeläge). Durchmesser und Dicke der Bremsscheibe müssen den Vorgaben Ihres Bremsenherstellers entsprechen. Prüfen Sie den Zustand und die zulässige Mindestdicke der Bremsscheibe, bevor Sie neue Beläge montieren.

Müssen neue Bremsbeläge eingebremst werden?

Ja. Befolgen Sie die Montageanleitung und führen Sie das empfohlene Einbremsverfahren vor anspruchsvollen Fahrten vollständig durch. Das Einbremsen bereitet das neue Reibmaterial vor und erzeugt eine gleichmäßige Übertragungsschicht auf der Bremsscheibe.

Welche Mischung empfiehlt Gorilla Brakes für E-Bikes?

Gorilla Brakes ordnet die Standardmischung Ceramic seiner Performance-Reihe für herkömmliche Fahrräder zu. Für E-Bikes empfiehlt Gorilla Brakes die Bremsbelagreihen Enduro Pro und Factory Racing. Stimmen Sie die Belagform und die gesamte Bremsanlage auf Ihr Fahrrad und sein Gesamtgewicht ab.

Was ist in einer Packung enthalten?

Jede Packung enthält 2 Bremsbeläge und 1 Belagfeder für einen kompatiblen Bremssattel. Prüfen Sie Vorder- und Hinterradbremssattel getrennt, bevor Sie zwei Packungen bestellen.

  • 5 stars: 17 (94%)
  • 4 stars: 1 (6%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
c
clive hogan

OK in the dry. In the wet still quite good to be fair. Will get some more.

Hi Clive, thanks for the great review! Brilliant to hear the pads are performing well in both dry and wet conditions. We really appreciate your support and look forward to helping you again.

m
mark tacey

Awesome stopping power, a noticeable improvement over standard.

Hi Mark, we're thrilled to hear you're enjoying the improved stopping power! Thanks for sharing your experience with the Shimano MT Series pads. Ride safe!

J
Jon Holmes

Really happy with the pads

Hi Jon, we're thrilled to hear you're happy with the pads! Thanks for your support and enjoy riding!

M
Miguel Gutierrez

They were awesome. Noticeably better than stock and have held up well here in the descents of Utah.

Hi Miguel, we're thrilled to hear you're happy with the Shimano MT Series brake pads! Thanks for sharing your experience, and happy riding in Utah!

D
Dave

New pads are spot on for braking, only concern I have is when it’s wet brakes squeal like nails down a blackboard.
Not sure if it’s because they’re new, only Done 50 miles but still **** of a squeak in wet conditions.

Hi Dave,

Thanks for the feedback, and I’m glad to hear the braking performance is spot on.

With resin pads, a bit of noise in wet conditions can happen, especially when the pads are still quite new. At around 50 miles they may still be bedding into the rotor properly, and in the wet you can get a temporary squeal as water, grit and road film pass between the pad and rotor.

A few things to check:

Make sure the caliper is aligned correctly and the rotor is running clean through the pads.

Avoid using strong cleaners or bike wash directly on the braking surface, as this can interfere with the transfer layer on the rotor.

After washing or riding in heavy rain, do a few firm controlled stops to put some heat back into the pads and dry the system out.

The important part is that the pads are braking well, so it does not sound like a power issue. Wet-weather squeal is normally vibration rather than the pad itself being faulty, but keep an eye on it as they get a bit more use.

If it continues after a few more rides, send us a quick photo of the pads and rotor and we’ll take a look.

Kind regards,
Lee
Gorilla Brakes

L
Lee

Best brake pads i have ever used i had gorilla pads in the front and shimano in the rear i had massive brake fade 2 weeks ago in the rear wheel but the gorilla pads in the front held me all the way down those big hills for the rest of the day i have just fitted gorilla in the back brake plus they dont wear down half has much has most good brands they are worth the money

Thanks for a great reveiw

A
Andrew Holmes

Racing stealth pads once bedded in they made a massive improvement over the standard pads very pleased highly recommend

Hi there! Thanks for leaving us a review. We're so glad to hear that our Shimano MT Series (B-Type) - Factory Racing Stealth Disc Brake Pads have made a massive improvement for you. We pride ourselves on providing high-quality products, so we're happy to know we've met your expectations. Thanks for recommending us! Happy riding!

P
Paul Whale

Who would have thought that swapping out the OE pads would make such a massive difference?!

As soon as these weee bedded in (like, 5 mins tops) the braking was notably improved, I’d say 300% better! And on bog standard Shimano MT200 too. Really appreciated this next time out on the trails.

Lots of advice from the Gorilla Team beforehand and a huge amount of guidance and tips on the site too.

British firm too. Support our growing bike trade guys!

Hi there!

We're so glad to hear that you noticed a significant improvement in braking performance after switching to our Shimano MT Series (B-Type) brake pads! We take pride in providing high-quality products that make a difference on the trails.

Thank you for mentioning our customer service and website resources. We strive to provide helpful advice and guidance to our fellow riders. And as a British company, we truly appreciate your support for the growing bike trade.

Ride on!

The Gorilla Brakes Team

J
James McManus

Good Quality and great braking power

Thank you for your review! We are glad to hear that you are enjoying the Shimano MT Series (B-Type) – Sintered Disc Brake Pads. We strive to provide high-quality products that deliver excellent braking power. Thank you for choosing Gorilla Brakes!

A
Anonymous

Definitely 5STAR,I ove it.

Hi there! We're thrilled to hear that you're loving our Shimano MT Series Enduro Pro Ultimate Disc Brake Pads. Thank you for taking the time to leave us a 5-star review, it means a lot to us. Happy riding! 🙂

E
Emanuel

Great quality pads.

The ceramic compound pads are very progressive and powerful, but they remain quiet in all conditions.

By comparison, under the same amount of lever's pressure, these pads stop you with the same power as Shimano sintered equivalent.

I found the pads reliable on trails, at the bike park and on XC courses.

Hi Emanuel,

Really appreciate you taking the time to leave this great to hear how well they’re working across different riding styles.

That progressive feel with strong, consistent power (without the noise) is exactly what we aim for with the Ceramic compound, so it’s spot on that you’re getting that both on trails and at the bike park.

Good comparison with the Shimano sintered too that’s a strong benchmark 👍

Thanks again for the support, and if you ever need anything just give us a shout!

M
Matt Bailey

These pads give you unbelievable breaking power

Thank you for your review of our Shimano MT Series (B-Type) – Sintered Disc Brake Pads. We are happy to hear that you are experiencing unbelievable breaking power with these pads. Our team at Gorilla Brakes strives to provide high-quality products that exceed our customers' expectations. Keep enjoying your rides with confidence and thank you for choosing Gorilla Brakes.

P
Paul Nixon

Bought these to replace the expensive Shimano originals. They work better, are compatable with disc materials so no squealing and give you lots of power. Unless you weigh 100Kg plus and are going down Alpe d' Huez the heat dissipation seems just fine.

Hi there, thank you for taking the time to leave a review for our Shimano MT Series (B-Type) – Factory Racing Stealth Disc Brake Pads. We are glad to hear that you found our product to be a more affordable and effective alternative to the Shimano originals. It's great to know that they work well with different disc materials and provide strong braking power without any squealing. We appreciate your feedback and hope that you continue to enjoy your rides with our brake pads. Happy cycling!

L
Lawrence Newman

Great product
..arrived quickly and love the brand

Thank you for your positive feedback

A
Anonymous

.

Thank you for your review! We appreciate your feedback and are happy to hear that you are satisfied with our Shimano MT series semi-metallic disc brake pads. If you ever have any questions or concerns, please don't hesitate to reach out to us. Happy riding!

S
Simon C

Brilliant. Massive improvement over the stock pads. Quick delivery too. Thanks.

Hi there! Thank you for your kind words about our Shimano MT Series (B-Type) – Semi-Metallic Disc Brake Pads. We're so glad to hear that they were a massive improvement over the stock pads and that you received them quickly. Thank you for choosing Gorilla Brakes and happy riding!

A
Anonymous

Very nice upgrade to my brakes.

Hi there! We're so glad to hear that you enjoyed the upgrade to your brakes with our Shimano MT Series (B-Type) – Enduro Pro Resin Disc Brake Pads. Thank you for choosing Gorilla Brakes, and happy riding!

M
Marc Rhodes

Perfect! Will be a repeat customer!

Thank you for your positive feedback! We are thrilled to hear that you are satisfied with our Shimano MT Series (B-Type) brake pads. We appreciate your support and look forward to serving you again in the future. Ride on!