Plaquettes de frein Shimano XTR 2 pistons | BR-M9100

Plaquettes de frein à disque Shimano XTR 2 pistons compatibles avec les étriers hydrauliques BR-M9100. Les systèmes XTR 2 pistons utilisent les formes de plaquettes G04TI, G04S, G03A, G03S, J04C et J03A pour des performances haut de gamme en trail, avec une attaque franche, une modulation précise et un freinage fiable dans des conditions variées.

Compatibilité XTR 2 Pistons

Formes de plaquettes

G04TI / G04S / G03A / G03S / J04C / J03A

Étriers compatibles

BR-M9100 (Shimano XTR 2 Pistons)


Enduro Pro

Puissance de freinage maximale et excellente résistance à l’échauffement pour les longues descentes et les utilisations intensives.

Performance maximale.


Factory Racing

Composés axés sur la performance, optimisés pour la modulation, le toucher au levier et un freinage contrôlé.

Puissance et contrôle équilibrés.


Composés Standard

Inclut des options Sintered, Semi-Metallic et Ceramic offrant des performances fiables au quotidien.

Performance quotidienne.

Besoin d’aide pour choisir un composé ? Consultez le guide ci-dessous.

Voir le guide des composés et les modèles compatibles ↓

Workshop Notes — Shimano XTR 2-Piston (BR-M9100)

  • Noise & squeal: Most issues are rotor contamination or uneven piston retraction. Clean rotors with isopropyl, re-centre the caliper and bed pads in fully.
  • Rotor rub / uneven wear: One piston can become “lazy” from brake dust and grit. Push pistons out slightly, clean around the piston edges, then lubricate with a tiny amount of mineral oil.
  • Lever feel: If bite point changes after a pad swap, it’s usually air or old fluid. A proper bleed restores a firm, repeatable bite point.
  • Heat management: For long descents or heavier riders, choose higher heat-resistance compounds and complete a full bed-in for consistent braking.

🏆 Enduro Pro Compound Comparison (Highest Performance)

Compound Backing Plate Dry Wet Heat Life Best For
Enduro Pro Ultimate 🟧 Orange ★★★★★+ ★★★★★+ ★★★★★+ ★★★★★+ Aggressive trail, long descents, maximum control
Enduro Pro Semi-Metallic 🔵 Blue ★★★★★ ★★★★★ ★★★★★ ★★★★★ All-weather riding, consistent bite in the wet
Enduro Pro Resin ⚫ Black ★★★★ ★★★ ★★★★ ★★★★ Quieter braking, dry trails, smooth modulation

🏁 Factory Racing Compound Comparison (High Performance)

Compound Backing Plate Dry Wet Heat Life Best For
Factory Racing (Green) 🟩 Steel ★★★★ ★★★★ ★★★★ ★★★★★+ High-load riding, e-bike use, maximum longevity
Factory Racing Titanium ⚪ Titanium ★★★★ ★★★ ★★★★ ★★★ Lightweight builds, XC and dry conditions
Factory Racing Stealth 🟪 Stealth Purple ★★★★★ ★★★★ ★★★★ ★★★★ Quiet power and strong modulation in mixed conditions
Factory Racing Organic ⚪ Grey ★★★★ ★★ ★★ ★★★★ Smooth feel, low rotor wear, everyday riding

🔧 Standard Compound – Everyday Performance

Compound Backing Plate Dry Wet Heat Life Best For
Semi-Metallic ⚫ Black ★★★★ ★★★ ★★★ ★★★ Everyday trail riding and commuting
Ceramic – NANO TECH 🟢 Green ★★★★★ ★★★★ ★★★ ★★★ Dry conditions, smoother feel, reduced rotor wear
ENDURO Ceramic 🔴 Red ★★★★★ ★★★★★ ★★★★ ★★★★ Heavier riders and higher heat trail riding
Sintered (Metallic) 🟡 Gold ★★★★★ ★★★★★ ★★★★★+ ★★★★★ Wet winter riding, mud and maximum durability

📚 Helpful Resources

🔧 How to Install Gorilla Brakes Pads 🚴 Bedding-in New Brake Pads Guide 🔊 Hydraulic Brake Noise 📊 Gorilla Brakes Compound Comparison Chart ♻️ Brake Pad Recycling Program 🧰 Customer Support 📞 Contact Gorilla Brakes 📰 Gorilla Brakes Latest News

Frequently Asked Questions

What brake pads fit Shimano XTR BR-M9100 brakes
BR-M9100 uses G04TI, G04S, G03A, G03S, J04C and J03A pad shapes.
Why do my XTR brakes squeal after changing pads
Squeal is usually contamination or uneven piston movement. Clean rotors, reset pistons and bed pads in fully.
Which compound is best for XTR 2-piston brakes
For wet and gritty riding choose sintered or Enduro Pro Semi-Metallic. For quieter trail riding choose resin or ceramic options.