Plaquettes de frein Shimano SLX 2 pistons | BR-M7100 BR-M7000

Plaquettes de frein à disque Shimano SLX 2 pistons compatibles avec les étriers hydrauliques BR-M7100 et BR-M7000. Conçues pour le trail et le all-mountain, les systèmes SLX 2 pistons utilisent les formes de plaquettes G04TI, G04S, G03A, G03S, J04C et J03A pour une puissance constante, une modulation précise et une gestion thermique fiable.

Compatibilité SLX 2 Pistons

Formes de plaquettes

G04TI / G04S / G03A / G03S / J04C / J03A

Étriers compatibles

BR-M7100 / BR-M7000 (Shimano SLX 2 Pistons)


Enduro Pro

Puissance de freinage maximale et excellente résistance à l’échauffement pour les longues descentes et les utilisations intensives.

Performance maximale.


Factory Racing

Composés axés sur la performance, optimisés pour la modulation, le toucher au levier et un freinage contrôlé.

Puissance et contrôle équilibrés.


Composés Standard

Inclut des options Sintered, Semi-Metallic et Ceramic offrant des performances fiables au quotidien.

Performance quotidienne.

Besoin d’aide pour choisir un composé ? Consultez le guide ci-dessous.

Voir le guide des composés et les modèles compatibles ↓

Workshop Notes — Shimano SLX 2-Piston (BR-M7100 / BR-M7000)

  • Noise & squeal: Most noise is contamination (cleaners, chain lube) or uneven piston retraction. Clean the rotor, re-centre the caliper and bed pads in properly.
  • Rotor rub / uneven wear: Usually one piston is “lazy” from brake dust and winter grit. Push pistons out slightly, clean the sides, then lubricate with a tiny amount of mineral oil so both retract evenly.
  • Creeping / soft lever: Typically an incomplete bleed or old fluid. Heavy users benefit from more regular bleeds for consistent bite point on long descents.
  • Heat management: For long, steep descents or heavier riders, choose higher heat-stability compounds and complete a full bed-in for consistent lever feel.

🏆 Enduro Pro Compound Comparison (Highest Performance)

Compound Backing Plate Dry Wet Heat Life Best For
Enduro Pro Ultimate 🟧 Orange ★★★★★+ ★★★★★+ ★★★★★+ ★★★★★+ Hard trail riding, long descents, heavier riders, maximum control
Enduro Pro Semi-Metallic 🔵 Blue ★★★★★ ★★★★★ ★★★★★ ★★★★★ All-weather UK riding, mixed terrain, consistent bite in the wet
Enduro Pro Resin ⚫ Black ★★★★ ★★★ ★★★★ ★★★★ Quieter braking, dry trails, smoother modulation for everyday riding

🏁 Factory Racing Compound Comparison (High Performance)

Compound Backing Plate Dry Wet Heat Life Best For
Factory Racing (Green) 🟩 Steel ★★★★ ★★★★ ★★★★ ★★★★★+ High-load riding, e-bike use, long descents, maximum longevity
Factory Racing Titanium ⚪ Titanium ★★★★ ★★★ ★★★★ ★★★ Fast trail/XC, lighter riders, dry conditions
Factory Racing Stealth 🟪 Stealth Purple ★★★★★ ★★★★ ★★★★ ★★★★ Quiet power and strong modulation in mixed UK conditions
Factory Racing Organic ⚪ Grey ★★★★ ★★ ★★ ★★★★ Smooth, quiet feel for everyday riding and lower rotor wear

🔧 Standard Compound – Everyday Option

Compound Backing Plate Dry Wet Heat Life Best For
Semi-Metallic ⚫ Black ★★★★ ★★★ ★★★ ★★★ All-round trail riding and commuting
Ceramic – NANO TECH 🟢 Green ★★★★★ ★★★★ ★★★ ★★★ Dry conditions, low rotor wear, smoother lever feel
ENDURO Ceramic 🔴 Red ★★★★★ ★★★★★ ★★★★ ★★★★ More heat, heavier riders, longer descents
Sintered (Metallic) 🟡 Gold ★★★★★ ★★★★★ ★★★★★+ ★★★★★ Wet winter riding, mud and grit, maximum durability

📚 Helpful Resources

Frequently Asked Questions

What brake pads fit Shimano SLX BR-M7100 brakes
SLX BR-M7100 and BR-M7000 2-piston calipers use G04TI, G04S, G03A, G03S, J04C and J03A pad shapes.
Why do my SLX brakes squeal after a pad change?
Squeal is typically caused by contamination or uneven piston retraction. Clean the rotor, reset pistons and bed pads in correctly.
What compound is best for SLX 2-piston brakes?
For wet UK riding choose sintered or Enduro Pro Semi-Metallic. For quieter trail riding choose resin or ceramic options.