Shimano Série MT (Type B) – Plaquettes de frein à disque céramiques | Gorilla Brakes

Name: Shimano Série MT (Type B) – Plaquettes de frein à disque céramiques | Gorilla Brakes
Brand: Gorilla Brakes
SKU: N25-SH01-CER
Price: 12.99 GBP
Availability: InStock

🔥 150,000+ riders trust Gorilla Brakes worldwide⭐ Rated 4.8/5 from verified customers

£12.99 GBP

Promotion Épuisé

Taxes incluses. Frais d'expédition calculés à l'étape de paiement. Pour les livraisons en France et en Allemagne : aucun supplément à payer à la livraison. Gorilla Brakes prend en charge toutes les taxes, droits de douane et frais d’importation. Vous payez uniquement le montant total affiché lors du paiement.

Vérifier la compatibilité →

Composé sélectionné: CeramicUn freinage doux, progressif et discret pour le XC au quotidien, la route, le gravel et les trajets quotidiens. Ce composé fait partie de la gamme Performance de Gorilla Brakes pour les vélos classiques.

🚚 Plus que £25.00 pour profiter de la LIVRAISON RAPIDE GRATUITE au Royaume-Uni

Avant + arrière ?Pour l’avant et l’arrière, choisissez 2 paquets si les deux étriers utilisent cette forme de plaquette. Vérifiez le contenu de chaque paquet ci-dessous.

✓ Expédition rapide depuis le Royaume-Uni
✓ Retours sous 60 jours
✓ Garantie produit à vie

£12.99

Afficher tous les détails

Plaquettes de frein Gorilla Brakes Ceramic pour les étriers compatibles indiqués ci-dessous.

Vérifiez la forme de vos plaquettes actuelles et le modèle exact de votre étrier avant de commander. Les informations de performance décrivent le composé de friction Ceramic.

En bref

Caractéristiques

Composé: Ceramic
Plaque de support: Acier
Forme de plaquette: Shimano type B
Pratique: XC au quotidien, route, gravel et trajets quotidiens
Contenu du pack: 2 plaquettes de frein et 1 ressort
Équipement: 1 étrier de frein compatible

Chaque paquet contient une paire de plaquettes (2 plaquettes) et 1 ressort pour un étrier compatible. Pour remplacer les plaquettes avant et arrière, vérifiez les deux étriers et commandez le paquet adapté à chacun.

À vérifier avant de commander

Compatibilité

Ces plaquettes utilisent la forme Shimano B-Type. Vérifiez le code exact de l’étrier ci-dessous ; les noms de séries Shimano ne suffisent pas à déterminer la compatibilité des plaquettes.

Étriers compatibles
Gamme de freins	Étriers compatibles
Shimano MT	BR-MT500, BR-MT400, BR-MT410, BR-MT200
Shimano série M	BR-M3050, BR-M315, BR-M355, BR-M365, BR-M375, BR-M395, BR-M4050, BR-M415, BR-M416, BR-M416A, BR-M445, BR-M446, BR-M447, BR-M465, BR-M475, BR-M485, BR-M486, BR-M495, BR-M505, BR-M506, BR-M515, BR-M515-LA, BR-M525, BR-M575
Shimano trekking / mécanique	BR-T615, BR-T675, BR-TX805, BR-C501, BR-C601
Shimano Flat-Mount / CUES	BR-UR300, BR-U6030-F, BR-U6030-R

Recommandation pour les vélos électriques

Gorilla Brakes place le composé Ceramic standard dans sa gamme Performance destinée aux vélos classiques. Pour rouler à vélo électrique, Gorilla Brakes recommande les gammes de plaquettes Enduro Pro et Factory Racing. Adaptez la forme des plaquettes et l’ensemble du système de freinage à votre vélo et à sa charge totale.

Compatibilité des disques

Ce composé convient à tous les types de disques de frein de vélo, y compris ceux portant la mention « resin pads only » (plaquettes en résine uniquement).

Le diamètre et l’épaisseur du disque doivent respecter les spécifications du fabricant de vos freins. Vérifiez l’état du disque et son épaisseur minimale autorisée avant de monter des plaquettes neuves.

Performances du composé

Ceramic

Un freinage doux, progressif et discret pour le XC au quotidien, la route, le gravel et les trajets quotidiens. Ce composé fait partie de la gamme Performance de Gorilla Brakes pour les vélos classiques.

Les performances de freinage et l’usure réelles dépendent de votre système de freinage, du disque, du rodage et des conditions d’utilisation.

Gestion de la chaleur

Plaques de support en aluminium ou en acier ?

Ces plaquettes utilisent une plaque de support en acier. Les conseils sur le composé concernent le matériau de friction Ceramic standard.

Montage et rodage

Suivez le guide de montage de votre système de freinage, puis effectuez la procédure de rodage recommandée avant une utilisation normale.

Google Top Quality Store

Verified by Google

5.0/5.0

Verified Quality Store

Aide et montage

Préparez vos freins

Vérifiez la compatibilité, préparez vos freins et trouvez de l’aide.

Vos questions

À propos de ces plaquettes

Compatibilité, matériaux et performances : les réponses à vos questions.

Ceramic est-il le même composé qu’Enduro Ceramic ?

Non. Cette fiche concerne Ceramic standard, une option de la gamme Performance de Gorilla Brakes pour le XC au quotidien, la route, le gravel et les trajets quotidiens. Enduro Ceramic est un composé distinct destiné aux sorties par temps plus chaud et sec.

Comment vérifier que ces plaquettes conviennent à mes freins ?

Comparez le modèle exact de l’étrier et la forme des plaquettes actuelles au tableau de compatibilité de cette page. Ne vous fiez pas uniquement au nom du levier de frein ou de la gamme. Vérifiez séparément les étriers avant et arrière, car certains systèmes utilisent des formes de plaquette différentes à chaque extrémité.

Quels disques puis-je utiliser avec ce composé ?

Ce composé convient à tous les types de disques de frein de vélo, y compris ceux portant la mention « resin pads only » (plaquettes en résine uniquement). Le diamètre et l’épaisseur du disque doivent respecter les spécifications du fabricant de vos freins. Vérifiez l’état du disque et son épaisseur minimale autorisée avant de monter des plaquettes neuves.

Les plaquettes neuves doivent-elles être rodées ?

Oui. Suivez le guide de montage et effectuez la procédure de rodage recommandée avant une utilisation exigeante. Le rodage prépare le matériau de friction neuf et forme une couche de transfert uniforme sur le disque.

Quel composé Gorilla Brakes recommande-t-il pour les vélos électriques ?

Que contient un paquet ?

Chaque paquet contient 2 plaquettes de frein et 1 ressort pour un étrier compatible. Vérifiez séparément les étriers avant et arrière avant de commander deux paquets.

5 stars: 17 (94%)
4 stars: 1 (6%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Some of the reviews shown are from related products the merchant grouped with this one.

OK in the dry. In the wet still quite good to be fair. Will get some more.

Hi Clive, thanks for the great review! Brilliant to hear the pads are performing well in both dry and wet conditions. We really appreciate your support and look forward to helping you again.

Awesome stopping power, a noticeable improvement over standard.

Hi Mark, we're thrilled to hear you're enjoying the improved stopping power! Thanks for sharing your experience with the Shimano MT Series pads. Ride safe!

Really happy with the pads

Hi Jon, we're thrilled to hear you're happy with the pads! Thanks for your support and enjoy riding!

They were awesome. Noticeably better than stock and have held up well here in the descents of Utah.

Hi Miguel, we're thrilled to hear you're happy with the Shimano MT Series brake pads! Thanks for sharing your experience, and happy riding in Utah!

New pads are spot on for braking, only concern I have is when it’s wet brakes squeal like nails down a blackboard.
Not sure if it’s because they’re new, only Done 50 miles but still **** of a squeak in wet conditions.

Hi Dave,

Thanks for the feedback, and I’m glad to hear the braking performance is spot on.

With resin pads, a bit of noise in wet conditions can happen, especially when the pads are still quite new. At around 50 miles they may still be bedding into the rotor properly, and in the wet you can get a temporary squeal as water, grit and road film pass between the pad and rotor.

A few things to check:

Make sure the caliper is aligned correctly and the rotor is running clean through the pads.

Avoid using strong cleaners or bike wash directly on the braking surface, as this can interfere with the transfer layer on the rotor.

After washing or riding in heavy rain, do a few firm controlled stops to put some heat back into the pads and dry the system out.

The important part is that the pads are braking well, so it does not sound like a power issue. Wet-weather squeal is normally vibration rather than the pad itself being faulty, but keep an eye on it as they get a bit more use.

If it continues after a few more rides, send us a quick photo of the pads and rotor and we’ll take a look.

Kind regards,
Lee
Gorilla Brakes

Best brake pads i have ever used i had gorilla pads in the front and shimano in the rear i had massive brake fade 2 weeks ago in the rear wheel but the gorilla pads in the front held me all the way down those big hills for the rest of the day i have just fitted gorilla in the back brake plus they dont wear down half has much has most good brands they are worth the money

Thanks for a great reveiw

Racing stealth pads once bedded in they made a massive improvement over the standard pads very pleased highly recommend

Hi there! Thanks for leaving us a review. We're so glad to hear that our Shimano MT Series (B-Type) - Factory Racing Stealth Disc Brake Pads have made a massive improvement for you. We pride ourselves on providing high-quality products, so we're happy to know we've met your expectations. Thanks for recommending us! Happy riding!

Who would have thought that swapping out the OE pads would make such a massive difference?!

As soon as these weee bedded in (like, 5 mins tops) the braking was notably improved, I’d say 300% better! And on bog standard Shimano MT200 too. Really appreciated this next time out on the trails.

Lots of advice from the Gorilla Team beforehand and a huge amount of guidance and tips on the site too.

British firm too. Support our growing bike trade guys!

Hi there!

We're so glad to hear that you noticed a significant improvement in braking performance after switching to our Shimano MT Series (B-Type) brake pads! We take pride in providing high-quality products that make a difference on the trails.

Thank you for mentioning our customer service and website resources. We strive to provide helpful advice and guidance to our fellow riders. And as a British company, we truly appreciate your support for the growing bike trade.

Ride on!

The Gorilla Brakes Team

Good Quality and great braking power

Thank you for your review! We are glad to hear that you are enjoying the Shimano MT Series (B-Type) – Sintered Disc Brake Pads. We strive to provide high-quality products that deliver excellent braking power. Thank you for choosing Gorilla Brakes!

Definitely 5STAR,I ove it.

Hi there! We're thrilled to hear that you're loving our Shimano MT Series Enduro Pro Ultimate Disc Brake Pads. Thank you for taking the time to leave us a 5-star review, it means a lot to us. Happy riding! 🙂

Great quality pads.

The ceramic compound pads are very progressive and powerful, but they remain quiet in all conditions.

By comparison, under the same amount of lever's pressure, these pads stop you with the same power as Shimano sintered equivalent.

I found the pads reliable on trails, at the bike park and on XC courses.

Hi Emanuel,

Really appreciate you taking the time to leave this great to hear how well they’re working across different riding styles.

That progressive feel with strong, consistent power (without the noise) is exactly what we aim for with the Ceramic compound, so it’s spot on that you’re getting that both on trails and at the bike park.

Good comparison with the Shimano sintered too that’s a strong benchmark 👍

Thanks again for the support, and if you ever need anything just give us a shout!

These pads give you unbelievable breaking power

Thank you for your review of our Shimano MT Series (B-Type) – Sintered Disc Brake Pads. We are happy to hear that you are experiencing unbelievable breaking power with these pads. Our team at Gorilla Brakes strives to provide high-quality products that exceed our customers' expectations. Keep enjoying your rides with confidence and thank you for choosing Gorilla Brakes.

Bought these to replace the expensive Shimano originals. They work better, are compatable with disc materials so no squealing and give you lots of power. Unless you weigh 100Kg plus and are going down Alpe d' Huez the heat dissipation seems just fine.

Hi there, thank you for taking the time to leave a review for our Shimano MT Series (B-Type) – Factory Racing Stealth Disc Brake Pads. We are glad to hear that you found our product to be a more affordable and effective alternative to the Shimano originals. It's great to know that they work well with different disc materials and provide strong braking power without any squealing. We appreciate your feedback and hope that you continue to enjoy your rides with our brake pads. Happy cycling!

Great product
..arrived quickly and love the brand

Thank you for your positive feedback

Thank you for your review! We appreciate your feedback and are happy to hear that you are satisfied with our Shimano MT series semi-metallic disc brake pads. If you ever have any questions or concerns, please don't hesitate to reach out to us. Happy riding!

Brilliant. Massive improvement over the stock pads. Quick delivery too. Thanks.

Hi there! Thank you for your kind words about our Shimano MT Series (B-Type) – Semi-Metallic Disc Brake Pads. We're so glad to hear that they were a massive improvement over the stock pads and that you received them quickly. Thank you for choosing Gorilla Brakes and happy riding!

Very nice upgrade to my brakes.

Hi there! We're so glad to hear that you enjoyed the upgrade to your brakes with our Shimano MT Series (B-Type) – Enduro Pro Resin Disc Brake Pads. Thank you for choosing Gorilla Brakes, and happy riding!

Perfect! Will be a repeat customer!

Thank you for your positive feedback! We are thrilled to hear that you are satisfied with our Shimano MT Series (B-Type) brake pads. We appreciate your support and look forward to serving you again in the future. Ride on!

Article ajouté au panier

Shimano Série MT (Type B) – Plaquettes de frein à disque céramiques | Gorilla Brakes