• Gorilla Brakes Enduro Pro Resin disc brake pads for SRAM RED, Force, S-900, Level TLM and Ultimate asymmetric fit
1 1

SRAM RED / Force / Rival 1 & 22 HRD / Level ULT – Enduro Pro Resin Disc Brake Pads (Small Asymmetric) | Gorilla Brakes

SRAM RED / Force / Rival 1 & 22 HRD / Level ULT – Enduro Pro Resin Disc Brake Pads (Small Asymmetric) | Gorilla Brakes

🔥 150,000+ riders trust Gorilla Brakes worldwide⭐ Rated 4.8/5 from verified customers

£16.99 GBP
£16.99 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Check compatibility →
Choose this compound if…Quiet braking, smooth modulation and strong initial bite in mostly dry conditions.

🚚 You’re £25.00 away from FREE FAST UK shipping

Front + rear?For front and rear, choose 2 packs if both calipers use this pad shape. Check the pack contents below.
£16.99
View full details

Gorilla Brakes Enduro Pro Resin brake pads for the compatible SRAM calipers listed below.

Choose the pad shape for your exact caliper; the shared performance ratings describe the Enduro Pro Resin friction compound.

At a glance

Specifications

Compound
Enduro Pro Resin
Backing plate
Steel
Pad shape
SRAM Small Asymmetric
Riding
Everyday trail, road and gravel; compatible e-bike brakes
Pack contents
2 brake pads and 1 pad spring
Coverage
1 compatible brake caliper

Each pack contains one pair of pads (2 pads) and 1 spring for one compatible caliper. For front and rear replacement, check both calipers and order the appropriate pack for each.

Check before ordering

Compatibility

These pads use the SRAM Small Asymmetric shape. They fit the listed monoblock and mechanical-shift HydroR calipers, including Rival 1 HRD and Rival 22 HRD. They do not fit Rival eTap AXS or newer two-piece road calipers using the Small pad shape.

Brake familyCompatible calipers
SRAM monoblock road calipersSelected RED, Force and S-900 Aero using the Small Asymmetric pad shape
SRAM monoblock LevelLevel TLM and Ultimate A1 (2017–2019)
SRAM HydroR mechanical-shift HRDRival 1 HRD, Rival 22 HRD, RED 22, Force 22 / Force 1 and S-700 calipers using the Small Asymmetric pad shape

E-bike and everyday riding

Enduro Pro Resin is an e-bike-rated compound for everyday trail, road and gravel riding. Use this pad shape only with the compatible calipers listed here, and match the complete brake setup to your bike and total load.

Rotor compatibility

This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”.

Rotor diameter and thickness must meet your brake manufacturer’s specifications. Check rotor condition and minimum permitted thickness before fitting new pads.

Compound performance

Enduro Pro Resin

An Enduro Pro option for riders who value braking feel on everyday trail, road and gravel routes.

The ratings describe the compound. They do not promise silent braking or a fixed service life, and they are not separate scores for each pad shape or caliper.

Compound ratings out of 10

These scores describe the friction compound.

Braking performance
8
Fade resistance
8
Heat resistance
9
Lifespan
8
Quietness
8

Ratings from the supplied Enduro Pro compound chart. Higher scores indicate stronger performance in that category; a higher quietness score means quieter braking.

Heat management

Caliper temperature vs rotor temperature

Swipe or scroll sideways to read the whole plot.

All curves shown

Caliper temperature vs rotor temperature Indicative comparison of caliper temperature against rotor temperature, both in °C, for Sintered, Enduro Pro Semi-Metallic, Enduro Pro Resin and Enduro Pro Ultimate. 0 50 100 150 200 250 300 350 400 450 Rotor temperature (°C) 25 35 45 55 65 75 85 95 105 115 125 Caliper temperature (°C) Sintered Enduro Pro Semi-Metallic Enduro Pro Resin Enduro Pro Ultimate SinteredEnduro Pro Semi-MetallicEnduro Pro ResinEnduro Pro Ultimate
About this test

The horizontal axis shows rotor temperature; the vertical axis shows caliper temperature. At the same rotor temperature, a lower curve means a cooler caliper in this test setup. Consider this alongside braking power, pad life and correct fitment when choosing pads for long descents or heavier loads.

Indicative test comparison. Results relate to the tested samples and setup.

Compare against other brands

Compare braking power across compounds

All eight curves use the Shimano XT RT86 rotor. Choose a compound to highlight its tested result.

Why some curves stop earlier

Each test run stopped when the measured caliper temperature reached 120°C, the stopping threshold used to protect the piston seals in this test setup. The horizontal axis shows rotor temperature. Sintered’s shorter curve means the caliper reached the limit at a lower rotor temperature.

Swipe or scroll sideways to read the whole plot.

All curves shown

Gorilla compounds: braking power Bedded-in Gorilla pads tested with the Shimano XT RT86 rotor. Horizontal axis: rotor temperature (°C). Vertical axis: braking power (W), starting at 0. Approximate reconstruction from the supplied test graph. Samples: Enduro Pro Ultimate · Shimano XT RT86 rotor; Enduro Pro Ultimate · Aluminium backing · Shimano XT RT86 rotor; Enduro Pro Resin Black · Shimano XT RT86 rotor; Enduro Pro Semi Metallic Blue · Shimano XT RT86 rotor; Sintered · Shimano XT RT86 rotor; Factory Racing Stealth Purple · Shimano XT RT86 rotor; Factory Racing Green · Shimano XT RT86 rotor; Factory Racing Organic · Shimano XT RT86 rotor. Gorilla compounds: braking power 75 150 225 300 375 450 0 300 600 900 1,200 1,500 Rotor temperature (°C) Braking power (W) Each curve ends when the caliper reaches 120°C, the stopping limit used in this test. Approximate reconstruction from the supplied test image. Y-axis starts at 0.
About this test

This chart compares braking power for bedded-in pads, all tested with the Shimano XT RT86 rotor. The horizontal axis shows rotor temperature (°C); the vertical axis shows braking power (W). Each curve represents the compound and backing-plate configuration named in the selector. Compare curves within their plotted ranges; no result is shown beyond the end of a curve.

Follow Enduro Pro Resin Black for this compound. This chart compares braking power against rotor temperature.

Test context: All pads shown can be good choices for their intended use when correctly matched to the bike and rotor, installed and bedded in. A lower or shorter curve does not by itself make a pad a poor everyday choice. Real riding temperatures depend on the route, total load, braking technique and setup; this test does not establish a temperature limit for the average rider. Rotor choice can substantially affect braking power, but these results apply to the tested combinations. This comparison does not guarantee the same improvement on another bike or identify one best pad for every rider.

Compare against other brands

Fitting and bedding in

Follow the installation guide for your braking system, then complete the recommended bedding-in procedure before normal riding.

Google Top Quality Store

Verified by Google

5.0/5.0
Verified Quality Store

Help & fitting

Get your brakes ready

Check your fitment, prepare your brakes and find support.

Your questions

About these brake pads

Fitment, materials and performance explained.

What do the performance ratings describe?

The ratings describe the Enduro Pro Resin friction compound. Individual pad shapes, backing plates and calipers have not been separately scored. Higher scores indicate stronger performance in that category; a higher quietness score means quieter braking.

How do I check that these pads fit my brakes?

Match the exact caliper model and existing pad shape to the compatibility table on this page. Do not rely on the brake lever name or series alone. Check the front and rear calipers separately, because some systems use different pad shapes at each end.

Which rotors can I use with this compound?

This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”. Rotor diameter and thickness must meet your brake manufacturer’s specifications. Check the rotor’s condition and minimum permitted thickness before fitting new pads.

Do new brake pads need bedding in?

Yes. Follow the installation guide and complete the recommended bedding-in procedure before demanding riding. Bedding in prepares the new friction material and establishes an even transfer layer on the rotor.

Can I use these pads on an e-bike?

Yes. Enduro Pro Resin is an e-bike-rated compound for everyday trail, road and gravel riding. Use this pad shape only with the compatible calipers listed on this page, and match the complete brake setup to your bike and total load.

What is included in one pack?

Each pack contains 2 brake pads and 1 pad spring for one compatible caliper. Check the front and rear calipers separately before ordering two packs.

Product video

Enduro Pro brake pad compounds

An overview of Enduro Pro Ultimate, Semi-Metallic and Resin. This listing supplies Enduro Pro Resin pads. See the product information for fitment and pack contents.

Watch on YouTube
  • 5 stars: 6 (67%)
  • 4 stars: 2 (22%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (11%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
J
John Hoban

Working great so far

Hi John, glad to hear the brake pads are working great so far! Thanks for sharing your feedback.

D
Donald Stazicker

big improvement over the standard pads for heavy duty braking with my e-bike on hilly terrain

Hi Donald,

Thank you for the great feedback. That is exactly what we design them for heavier e-bikes, hilly terrain and repeated braking where standard pads can start to struggle. Were also releasing a full brakes system soon hine-r.com

Really pleased to hear they have made a big improvement for you.

Kind regards,
Gorilla Brakes

A
Anonymous

Good quality pads, great stopping power and silent.

Thank you for your positive feedback! We're glad you're satisfied with the quality and performance of the brake pads. If you need anything else, feel free to reach out!

S
Steve

Great product, easy purchase.

Thank you for your feedback! We're so glad to hear that you had a positive experience with our product and found the purchase process to be easy. Happy riding!

P
Peter Batty

Excellent quality been in a wee, so quiet when braking and working efficiently, will see how they last, as it’s all hills around here so wear is heavy

Hi there! Thank you so much for taking the time to leave us a review. We are thrilled to hear that you are enjoying the excellent quality of our Enduro Ceramic Disc Brake Pads. We understand the importance of quiet and efficient braking, especially on hilly terrain. We hope they continue to impress you with their performance and durability. Happy riding!

C
Christopher Compston

Although the brake pads were the correct type, they didn’t fit. I had to purchase original SRAM pads instead, causing unnecessary extra expense, and I’ll be using those going forward.

T
Tim

Great pads.

Thank you for your positive feedback! We're glad to hear that you are enjoying our Enduro Pro Ultimate Disc Brake Pads. Happy riding!

A
Anonymous

Brake pads easy to fit and very pleased with performance in the dry but not used in wet conditions as yet.

Thank you for taking the time to leave a review! We're happy to hear that you found our brake pads easy to install and that they're performing well in dry conditions. We hope they continue to meet your expectations in wet conditions as well. If you ever have any questions or concerns, please don't hesitate to reach out. Ride on!

D
Dougie Brammer

Super brake pads used Gorilla pads for a while cant fault them.

Hi there! Thank you for leaving such a positive review for our Gorilla Brakes Sintered Disc Brake Pads. We are thrilled to hear that you have been using them for a while and have had a great experience. We take pride in creating high-quality products that our customers can rely on. If you ever need any assistance with your brakes, please don't hesitate to reach out to us. Happy riding!