Replace worn, rusty or rounded brake pad retaining hardware with the Gorilla Brakes Shimano Road / Gravel Flat-Mount Brake Pad Retaining Pin Kit.
This stainless steel retaining pin kit is designed for selected Shimano road, gravel and flat-mount disc brake calipers, including Shimano 105 Di2, GRX, Ultegra Di2, Dura-Ace Di2, Tiagra, XTR flat-mount, XT flat-mount, SLX flat-mount and selected Shimano RS calipers.
Brake pad retaining pins are small parts, but they are important. A rusty, rounded, bent or seized retaining pin can make future pad changes difficult and may stop the pads sitting correctly inside the caliper. Replacing the retaining hardware when fitting new brake pads gives your brake caliper a cleaner, safer and more professional refresh.
Key Features
- Replacement brake pad retaining pin kit for selected Shimano road, gravel and flat-mount disc brake calipers
- Stainless steel construction for improved corrosion resistance
- Ideal for replacing rusty, rounded, seized or missing pad retaining pins
- Perfect add-on when fitting new Shimano road or gravel disc brake pads
- Suitable for many Shimano 105, GRX, Ultegra, Dura-Ace, Tiagra, XTR, XT and SLX flat-mount calipers
- Supplied with retaining safety clips
Compatibility
This retaining pin kit is designed for the following Shimano disc brake calipers:
| Shimano Group |
Compatible Caliper Models |
| Shimano 105 Di2 |
BR-R7070, BR-R7170 |
| Shimano GRX |
BR-RX400, BR-RX810, BR-RX820, BR-RX820-LE |
| Shimano Ultegra Di2 |
BR-R8070, BR-R8170 |
| Shimano Dura-Ace Di2 |
BR-R9170, BR-R9270 |
| Shimano Tiagra |
BR-4770 |
| Shimano XTR Flat-Mount |
BR-M9100, BR-M9110 |
| Shimano Deore XT Flat-Mount |
BR-M8110 |
| Shimano SLX Flat-Mount |
BR-M7110 |
| Shimano RS Series |
BR-RS405, BR-RS785 |
Important: This kit is listed for the Shimano caliper models shown above only. Please check the model number printed on your brake caliper before ordering.
When Should You Replace Shimano Brake Pad Retaining Pins?
We recommend replacing your Shimano brake pad retaining pins if:
- The original pin is rusty or corroded
- The head is rounded or damaged
- The pin is bent or seized
- The safety clip is missing
- You are fitting new pads and want a clean hardware refresh
- You ride regularly in wet, winter or salted road conditions
What’s Included?
- 2 x stainless steel Shimano brake pad retaining pins
- 2 x retaining safety clips
Recommended add-on: Fit new retaining pins when replacing your Shimano road or gravel brake pads for a cleaner, more secure brake refresh.
