Good quality and only place I could find pack of 4 rather than them.coming in 2's at double the price 😆
Great so far! Stop exceptional and low noise.
Gorilla Brakes Enduro Pro Ultimate brake pads for the compatible SRAM calipers listed below.
Choose the pad shape for your exact caliper; the shared performance ratings describe the Enduro Pro Ultimate friction compound.
At a glance
Specifications
- Compound
- Enduro Pro Ultimate
- Backing plate
- Steel
- Pad shape
- SRAM Small Asymmetric
- Riding
- Road, gravel, endurance and XC
- Pack contents
- 2 brake pads and 1 pad spring
- Coverage
- 1 compatible brake caliper
Each pack contains one pair of pads (2 pads) and 1 spring for one compatible caliper. For front and rear replacement, check both calipers and order the appropriate pack for each.
Check before ordering
Compatibility
These pads use the SRAM Small Asymmetric shape. They fit the listed monoblock and mechanical-shift HydroR calipers, including Rival 1 HRD and Rival 22 HRD. They do not fit Rival eTap AXS or newer two-piece road calipers using the Small pad shape.
| Brake family | Compatible calipers |
|---|---|
| SRAM monoblock road calipers | Selected RED, Force and S-900 Aero using the Small Asymmetric pad shape |
| SRAM monoblock Level | Level TLM and Ultimate A1 (2017–2019) |
| SRAM HydroR mechanical-shift HRD | Rival 1 HRD, Rival 22 HRD, RED 22, Force 22 / Force 1 and S-700 calipers using the Small Asymmetric pad shape |
- Caliper / pad references
- SRAM Small Asymmetric — pad shape
E-bike compatibility
Enduro Pro Ultimate is an e-bike-rated compound. Use these pads only with the compatible calipers listed here, and match the complete brake setup to your bike and total load.
Rotor compatibility
This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”.
Rotor diameter and thickness must meet your brake manufacturer’s specifications. Check rotor condition and minimum permitted thickness before fitting new pads.
Compound performance
Enduro Pro Ultimate
Our published compound testing shows strong braking output as rotor temperatures rise. Enduro Pro Ultimate also achieved the best wear resistance within the bench test group.
These findings describe the samples and setups tested. Actual performance and wear depend on your braking system and riding conditions.
Heat management
Caliper temperature vs rotor temperature
Swipe or scroll sideways to read the whole plot.
All curves shown
About this test
The horizontal axis shows rotor temperature; the vertical axis shows caliper temperature. At the same rotor temperature, a lower curve means a cooler caliper in this test setup. Consider this alongside braking power, pad life and correct fitment when choosing pads for long descents or heavier loads.
Indicative test comparison. Results relate to the tested samples and setup.
Compare braking power across compounds
All eight curves use the Shimano XT RT86 rotor. Choose a compound to highlight its tested result.
Why some curves stop earlier
Each test run stopped when the measured caliper temperature reached 120°C, the stopping threshold used to protect the piston seals in this test setup. The horizontal axis shows rotor temperature. Sintered’s shorter curve means the caliper reached the limit at a lower rotor temperature.
Swipe or scroll sideways to read the whole plot.
All curves shown
About this test
This chart compares braking power for bedded-in pads, all tested with the Shimano XT RT86 rotor. The horizontal axis shows rotor temperature (°C); the vertical axis shows braking power (W). Each curve represents the compound and backing-plate configuration named in the selector. Compare curves within their plotted ranges; no result is shown beyond the end of a curve.
Two Enduro Pro Ultimate results are shown: the main comparison sample and the aluminium-backed sample. Both used the Shimano XT RT86 rotor. Compare each curve as its labelled backing-plate configuration.
Test context: All pads shown can be good choices for their intended use when correctly matched to the bike and rotor, installed and bedded in. A lower or shorter curve does not by itself make a pad a poor everyday choice. Real riding temperatures depend on the route, total load, braking technique and setup; this test does not establish a temperature limit for the average rider. Rotor choice can substantially affect braking power, but these results apply to the tested combinations. This comparison does not guarantee the same improvement on another bike or identify one best pad for every rider.Fitting and bedding in
Follow the installation guide for your braking system, then complete the recommended bedding-in procedure before normal riding.
Google Top Quality Store
Verified by Google
Help & fitting
Get your brakes ready
Check your fitment, prepare your brakes and find support.
Your questions
About these brake pads
Fitment, materials and performance explained.
How do I check whether these pads fit?
These pads use the SRAM Small Asymmetric shape. They fit the listed monoblock and mechanical-shift HydroR calipers, including Rival 1 HRD and Rival 22 HRD. They do not fit Rival eTap AXS or newer two-piece road calipers using the Small pad shape.
What is included in one pack?
Each pack contains one pair of pads (2 pads) and 1 spring for one compatible caliper. For front and rear replacement, check both calipers and order the appropriate pack for each.
Are the ratings specific to this pad shape?
No. The ratings describe the Enduro Pro Ultimate friction compound. Individual backing plates, pad shapes and calipers have not been separately scored.
What does the steel and aluminium comparison show?
The steel-backed sample kept the caliper cooler at comparable rotor temperatures in the tested setup. The graph compares caliper temperatures, not cooling time or every available pad shape.
Are these suitable for e-bikes?
Enduro Pro Ultimate is an e-bike-rated compound. Use these pads only with the compatible calipers listed here, and match the complete brake setup to your bike and total load.
How long will these pads last?
Enduro Pro Ultimate achieved the best wear resistance within the published bench test group. Actual pad life depends on the braking system, rider and load, terrain, weather, contamination and riding conditions.
Will these pads always be silent?
The compound has a quietness rating of 8 out of 10. Actual noise depends on the complete braking system, its condition, bedding in and riding conditions.
Product video
Enduro Pro brake pad compounds
An overview of Enduro Pro Ultimate, Semi-Metallic and Resin. This listing supplies Enduro Pro Ultimate pads. See the product information for fitment and pack contents.