Skip to product information
1 of 1

HOPE RX4+ / RX4-SH – Enduro Pro Semi-Metallic Disc Brake Pads | Gorilla Brakes

HOPE RX4+ / RX4-SH – Enduro Pro Semi-Metallic Disc Brake Pads | Gorilla Brakes

🔥 150,000+ riders trust Gorilla Brakes worldwide⭐ Rated 4.8/5 from verified customers

Regular price £19.99 GBP
Regular price Sale price £19.99 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity
Check compatibility →
Choose this compound if…A versatile balance of quiet operation, power and durability for mixed conditions.

🚚 You’re £25.00 away from FREE FAST UK shipping

Front + rear?For front and rear, choose 2 packs if both calipers use this pad shape. Check the pack contents below.
£19.99
View full details

Gorilla Brakes Enduro Pro Semi-Metallic replacement disc brake pads for road and gravel bikes with Hope RX4+ or original RX4-SH (Shimano) calipers. These use the HBSP323 shape with a 37 mm reference width.

Check the caliper name rather than the brake lever name when ordering.

At a glance

Specifications

Compound
Enduro Pro Semi-Metallic
Backing plate
Steel
Pad shape
Hope RX4+ / original RX4-SH — HBSP323 (37 mm reference width)
Riding
Trail, enduro, gravel and compatible e-bikes
Pack contents
2 brake pads and 1 pad spring
Coverage
1 compatible brake caliper

Each pack contains one pair of brake pads (2 pads) and 1 pad spring for one compatible caliper. Order two packs for both brakes only after checking that both calipers use this pad shape.

Check before ordering

Compatibility

For Hope RX4+ and original RX4-SH (Shimano) calipers using HBSP323 with a 37 mm reference width. Check the exact caliper version and complete pad outline. Not for original RX4-SR (SRAM), which uses the smaller HBSP359 shape with a 31 mm reference width. The two shapes are not interchangeable.

Compatible calipers
Brake familyCompatible calipers
Hope RX4+RX4+ mineral-oil and DOT versions using HBSP323
Original Hope RX4-SHOriginal RX4-SH (Shimano) using HBSP323
Caliper / pad references
HBSP323

E-bike and loaded riding

Enduro Pro Semi-Metallic is an e-bike-rated compound recommended for electric bikes, heavy cargo bikes and loaded touring. Use this pad shape only with the compatible calipers listed here, and match the complete brake setup to your bike and total load.

Rotor compatibility

This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”.

Rotor diameter and thickness must still meet your brake manufacturer’s specifications. Check the rotor’s condition and minimum permitted thickness before fitting new pads.

Compound performance

Enduro Pro Semi-Metallic

A versatile compound for trail, enduro and loaded riding. Our published testing highlights its dry braking performance and a cooler caliper than Sintered at comparable rotor temperatures.

These findings describe the tested samples and setups, not separate tests of every pad shape or caliper. Actual braking performance, temperature and wear depend on your braking system and riding conditions.

Compound ratings out of 10

These scores describe the friction compound.

Braking performance
9
Fade resistance
9
Heat resistance
9
Lifespan
8
Quietness
9

Ratings from the supplied Enduro Pro compound chart. Higher scores indicate stronger performance in that category; a higher quietness score means quieter braking.

Heat management

Caliper temperature vs rotor temperature

Swipe or scroll sideways to read the whole plot.

All curves shown

Caliper temperature vs rotor temperature Indicative comparison of caliper temperature against rotor temperature, both in °C, for Sintered, Enduro Pro Semi-Metallic, Enduro Pro Resin and Enduro Pro Ultimate. 0 50 100 150 200 250 300 350 400 450 Rotor temperature (°C) 25 35 45 55 65 75 85 95 105 115 125 Caliper temperature (°C) Sintered Enduro Pro Semi-Metallic Enduro Pro Resin Enduro Pro Ultimate SinteredEnduro Pro Semi-MetallicEnduro Pro ResinEnduro Pro Ultimate
All testing is carried out by Adam Read, Hine-R Engineering, Darwen, Lancashire, United Kingdom.
About this test

The horizontal axis shows rotor temperature; the vertical axis shows caliper temperature. At the same rotor temperature, a lower curve means a cooler caliper in this test setup. Consider this alongside braking power, pad life and correct fitment when choosing pads for long descents or heavier loads.

Indicative test comparison. Results relate to the tested samples and setup.

Compare against other brands

Compare braking power across compounds

All eight curves use the Shimano XT RT86 rotor. Choose a compound to highlight its tested result.

Why some curves stop earlier

Each test run stopped when the measured caliper temperature reached 120°C, the stopping threshold used to protect the piston seals in this test setup. The horizontal axis shows rotor temperature. Sintered’s shorter curve means the caliper reached the limit at a lower rotor temperature.

Swipe or scroll sideways to read the whole plot.

All curves shown

Gorilla compounds: braking power Bedded-in Gorilla pads tested with the Shimano XT RT86 rotor. Horizontal axis: rotor temperature (°C). Vertical axis: braking power (W), starting at 0. Approximate reconstruction from the supplied test graph. Samples: Enduro Pro Ultimate · Shimano XT RT86 rotor; Enduro Pro Ultimate · Aluminium backing · Shimano XT RT86 rotor; Enduro Pro Resin · Shimano XT RT86 rotor; Enduro Pro Semi-Metallic · Shimano XT RT86 rotor; Sintered · Shimano XT RT86 rotor; Factory Racing STEALTH · Shimano XT RT86 rotor; Factory Racing Hard · Shimano XT RT86 rotor; Factory Racing Organic · Shimano XT RT86 rotor. Gorilla compounds: braking power 75 150 225 300 375 450 0 300 600 900 1,200 1,500 Rotor temperature (°C) Braking power (W) Each curve ends when the caliper reaches 120°C, the stopping limit used in this test. Approximate reconstruction from the supplied test image. Y-axis starts at 0.
All testing is carried out by Adam Read, Hine-R Engineering, Darwen, Lancashire, United Kingdom.
About this test

This chart compares braking power for bedded-in pads, all tested with the Shimano XT RT86 rotor. The horizontal axis shows rotor temperature (°C); the vertical axis shows braking power (W). Each curve represents the compound and backing-plate configuration named in the selector. Compare curves within their plotted ranges; no result is shown beyond the end of a curve.

Follow Enduro Pro Semi-Metallic for this compound. These results relate to the tested configuration.

Test context: All pads shown can be good choices for their intended use when correctly matched to the bike and rotor, installed and bedded in. A lower or shorter curve does not by itself make a pad a poor everyday choice. Real riding temperatures depend on the route, total load, braking technique and setup; this test does not establish a temperature limit for the average rider. Rotor choice can substantially affect braking power, but these results apply to the tested combinations. This comparison does not guarantee the same improvement on another bike or identify one best pad for every rider.

Compare against other brands

Fitting and bedding in

Follow our installation guide, then complete the recommended bedding-in procedure to prepare the new friction material and establish an even transfer layer on the rotor.

Google Top Quality Store

Verified by Google

5.0/5.0
Verified Quality Store

Help & fitting

Get your brakes ready

Check your fitment, prepare your brakes and find support.

Your questions

About these brake pads

Fitment, materials and performance explained.

Which Hope RX4 calipers do these pads fit?

These pads fit RX4+ and original RX4-SH (Shimano) calipers using HBSP323, with a 37 mm reference width. They do not fit original RX4-SR (SRAM), which uses HBSP359 with a 31 mm reference width. Check the exact version and pad outline, not just the SRAM or Shimano lever name.

Is this the smaller original RX4-SR pad?

No. This is the larger HBSP323 shape with a 37 mm reference width. Original RX4-SR uses HBSP359 with a 31 mm reference width. Match the complete pad shape and exact caliper version.

What do the performance ratings describe?

The ratings describe the Enduro Pro Semi-Metallic friction compound. Individual pad shapes, backing plates and calipers have not been separately scored. Higher scores indicate stronger performance in that category; a higher quietness score means quieter braking.

Which rotors can I use with this compound?

This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”. Rotor diameter and thickness must meet your brake manufacturer’s specifications. Check the rotor’s condition and minimum permitted thickness before fitting new pads.

Do new brake pads need bedding in?

Yes. Follow the installation guide and complete the recommended bedding-in procedure before demanding riding. Bedding in prepares the new friction material and establishes an even transfer layer on the rotor.

Can I use these pads on an e-bike?

Yes. Enduro Pro Semi-Metallic is an e-bike-rated compound recommended for electric bikes, heavy cargo bikes and loaded touring. Use this pad shape only with the compatible calipers listed on this page, and match the complete brake setup to your bike and total load.

What is included in one pack?

Each pack contains 2 brake pads and 1 pad spring for one compatible caliper. Check the front and rear calipers separately before ordering two packs.

Product video

Enduro Pro brake pad compounds

An overview of Enduro Pro Ultimate, Semi-Metallic and Resin. This listing supplies Enduro Pro Semi-Metallic pads. See the product information for fitment and pack contents.

Watch on YouTube (opens in a new window)