• Gorilla Brakes Factory Racing Stealth disc brake pads for Magura MT Series – MT4, MT6, MT8, CMe4, MT Sport
1 1

Magura MT2 / MT4 / 7.X – Factory Racing Stealth Disc Brake Pads (Type 7.1 / 7.2 / 7.4) | Gorilla Brakes

Magura MT2 / MT4 / 7.X – Factory Racing Stealth Disc Brake Pads (Type 7.1 / 7.2 / 7.4) | Gorilla Brakes

🔥 150,000+ riders trust Gorilla Brakes worldwide⭐ Rated 4.8/5 from verified customers

£15.99 GBP
£15.99 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Check compatibility →
Selected compound: Factory Racing STEALTHQuiet braking and control for trail, road and gravel. Its tested profile covers dry and wet braking, lifespan, quietness and heat dissipation.

🚚 You’re £25.00 away from FREE FAST UK shipping

Front + rear?For front and rear, choose 2 packs if both calipers use this pad shape. Check the pack contents below.
£15.99
View full details

Gorilla Brakes Factory Racing STEALTH brake pads for the compatible calipers listed below.

Match your existing pad shape and exact caliper model before ordering. The shared ratings describe the Factory Racing STEALTH friction compound.

At a glance

Specifications

Compound
Factory Racing STEALTH
Backing plate
Steel
Pad shape
Magura Type 7 / MDP 7
Riding
Trail, road and gravel; compatible e-bike use
Pack contents
2 brake pads
Coverage
1 compatible brake caliper

Each pack contains two brake pads for one compatible caliper. Check the front and rear calipers separately before ordering two packs. No pad spring is included.

Check before ordering

Compatibility

Match the exact caliper model and existing pad shape to the list below before ordering. This Type 7 shape is for the listed MT two-piston calipers. MT5 and MT7 use Type 8 or Type 9 pads, and MT A2 uses Type 10. On MT Trail brakes, this shape fits the rear two-piston caliper only.

Brake familyCompatible calipers
MT two-pistonMTS, MT2, MT4, MT4E, MT4 eSTOP, MT4 FM and MT6 using Type 7 pads
MT8MT8, MT8 SL, MT8 Pro, MT8 Carbon, MT8 Raceline and MT8 SL FM using Type 7 pads
MT Trail rear caliperMT Trail Carbon, MT Trail Sport and MT Trail SL — rear two-piston caliper only

E-bike use

Factory Racing STEALTH is an e-bike-rated compound. Use this pad shape only with the compatible calipers listed here, and match the complete brake setup to your bike and total load.

Rotor compatibility

This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”.

Rotor diameter and thickness must meet your brake manufacturer’s specifications. Check rotor condition and minimum permitted thickness before fitting new pads.

Compound performance

Factory Racing STEALTH

Quiet braking and control for trail, road and gravel. Its tested profile covers dry and wet braking, lifespan, quietness and heat dissipation.

Factory Racing STEALTH appears as Factory Racing Stealth Purple in the comparison data. Scores are approximate readings from the supplied chart; actual braking and wear depend on your brake setup and riding conditions.

Compound ratings out of 10

These scores describe the friction compound.

Dry braking
≈9
Wet braking
≈8
Lifespan
≈8
Quietness
≈8.5
Heat dissipation
≈9

Approximate ratings out of 10 from the supplied Factory Racing compound chart. Higher ratings indicate stronger performance in that category; a higher quietness rating means quieter braking.

Compound testing

Factory Racing STEALTH: braking power

These pads use a steel backing plate. The ratings shown on this page describe the Factory Racing STEALTH friction compound.

The graph compares pad compounds and backing-plate configurations, all tested with the Shimano XT RT86 rotor.

Why some curves stop earlier

Each test run stopped when the measured caliper temperature reached 120°C, the stopping threshold used to protect the piston seals in this test setup. The horizontal axis shows rotor temperature. Sintered’s shorter curve means the caliper reached the limit at a lower rotor temperature.

Swipe or scroll sideways to read the whole plot.

All curves shown

Gorilla compounds: braking power Bedded-in Gorilla pads tested with the Shimano XT RT86 rotor. Horizontal axis: rotor temperature (°C). Vertical axis: braking power (W), starting at 0. Approximate reconstruction from the supplied test graph. Samples: Enduro Pro Ultimate · Shimano XT RT86 rotor; Enduro Pro Ultimate · Aluminium backing · Shimano XT RT86 rotor; Enduro Pro Resin Black · Shimano XT RT86 rotor; Enduro Pro Semi Metallic Blue · Shimano XT RT86 rotor; Sintered · Shimano XT RT86 rotor; Factory Racing Stealth Purple · Shimano XT RT86 rotor; Factory Racing Green · Shimano XT RT86 rotor; Factory Racing Organic · Shimano XT RT86 rotor. Gorilla compounds: braking power 75 150 225 300 375 450 0 300 600 900 1,200 1,500 Rotor temperature (°C) Braking power (W) Each curve ends when the caliper reaches 120°C, the stopping limit used in this test. Approximate reconstruction from the supplied test image. Y-axis starts at 0.
About this test

This chart compares braking power for bedded-in pads, all tested with the Shimano XT RT86 rotor. The horizontal axis shows rotor temperature (°C); the vertical axis shows braking power (W). Each curve represents the compound and backing-plate configuration named in the selector. Compare curves within their plotted ranges; no result is shown beyond the end of a curve.

Follow the Factory Racing Stealth Purple curve for the STEALTH compound. In the Shimano XT RT86 rotor comparison, its highest plotted output was approximately 1,030 W. Values are approximate reconstructions from the supplied graph. This result describes the tested pad and rotor setup, not a maximum power rating or a fitment test.

Test context: All pads shown can be good choices for their intended use when correctly matched to the bike and rotor, installed and bedded in. A lower or shorter curve does not by itself make a pad a poor everyday choice. Real riding temperatures depend on the route, total load, braking technique and setup; this test does not establish a temperature limit for the average rider. Rotor choice can substantially affect braking power, but these results apply to the tested combinations. This comparison does not guarantee the same improvement on another bike or identify one best pad for every rider.

Compare against other brands

Fitting and bedding in

Follow the installation guide for your braking system, then complete the recommended bedding-in procedure before normal riding.

Google Top Quality Store

Verified by Google

5.0/5.0
Verified Quality Store

Help & fitting

Get your brakes ready

Check your fitment, prepare your brakes and find support.

Your questions

About these brake pads

Fitment, materials and performance explained.

What do the performance ratings describe?

These approximate ratings describe the Factory Racing STEALTH friction compound and are read from the supplied Factory Racing chart. Individual pad shapes, backing plates and calipers have not been separately scored. Higher ratings indicate stronger performance in that category; a higher quietness rating means quieter braking.

How do I check that these pads fit my brakes?

Match the exact caliper model and existing pad shape to the compatibility table on this page. Do not rely on the brake lever name or series alone. Check the front and rear calipers separately, because some systems use different pad shapes at each end.

Which rotors can I use with this compound?

This compound is suitable for all bicycle disc brake rotor types, including rotors marked “resin pads only”. Rotor diameter and thickness must meet your brake manufacturer’s specifications. Check the rotor’s condition and minimum permitted thickness before fitting new pads.

Do new brake pads need bedding in?

Yes. Follow the installation guide and complete the recommended bedding-in procedure before demanding riding. Bedding in prepares the new friction material and establishes an even transfer layer on the rotor.

Can I use these pads on an e-bike?

Yes. Factory Racing STEALTH is an e-bike-rated compound. Use this pad shape only with the compatible calipers listed here, and match the complete brake setup to your bike and total load.

What is included in one pack?

Each pack contains 2 brake pads for one compatible caliper. No pad spring is included. Check the front and rear calipers separately before ordering two packs.

Product video

Factory Racing STEALTH brake pad compound

An overview of Gorilla Brakes Factory Racing STEALTH brake pads. See the product information for the compatible calipers, backing plate and pack contents.

Watch on YouTube
  • 5 stars: 4 (80%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (20%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
L
Lawrence

Good bite from new, no bed-in period. These work tremendously well from the first braking cycle.

Hi Lawrence, we're thrilled to hear that you're happy with the brakes right from the start! Thanks for taking the time to share your positive feedback. Enjoy your rides!

F
F E Tomline

Great products thank you

Hi F E Tomline, thank you for your kind words! We're glad you're happy with the products. If you need anything else, feel free to reach out!

b
bob chatterton

Quiet stopping achieved at last.

Hi Bobc, we're thrilled to hear your brakes are now stopping quietly! Thanks for sharing your experience with Gorilla Brakes.

R
Roger Waldner

Bremsperformance ist okay
Sind aber lauter als die originalen
Magura Sportbremsbeläge obwohl die Bremszangen ausgerichtet worden sind
Habe mehr erwartet schade

Vielen Dank für Ihr Feedback wir wissen es zu schätzen, dass Sie sich die Zeit genommen haben, Ihre Erfahrung zu teilen.

Es freut uns, dass die Bremsleistung passt, aber wir verstehen, wie frustrierend Geräusche sein können, besonders wenn man mehr erwartet hat.

Bei unserem Factory Racing Stealth Belag kommt das Geräusch nicht vom Belag selbst es entsteht durch Vibrationen im Bremssystem. Bremsbeläge sind ein statisches Bauteil: Die Bremskraft wird vom hydraulischen System erzeugt, und der Belag steuert, wie diese Kraft auf die Bremsscheibe übertragen wird. Wenn im System eine kleine Unregelmäßigkeit vorhanden ist, kann das zu Resonanzen führen genau das ist das Geräusch, das Sie hören.

Auch wenn der Bremssattel ausgerichtet wurde, können häufige Ursachen sein: ungleichmäßig arbeitende Kolben, leichte Verunreinigungen auf der Bremsscheibe, eine ungleichmäßige Reibschicht (Transfer Layer) oder Luft im System. Der Stealth Belag ist darauf ausgelegt, leise zu laufen, zeigt aber wie alle leistungsstarken Beläge kleinste Setup-Abweichungen sehr deutlich.

Wenn Sie möchten, hilft Ihnen unser Werkstatt-Team gerne mit ein paar schnellen Checks, damit die Bremse so leise läuft, wie sie soll melden Sie sich einfach bei uns

p
peter hudson

No complaints,would use company again

Thank you for your review! We are happy to hear that you had a positive experience with our company and our product. We appreciate your business and look forward to serving you again in the future. Happy riding!